Pre-Heater Webasto Pro 90 24V Diesel full complect

Description

The universal model with a wide smoothly adjustable power range is used on all types of commercial vehicles, including those carrying dangerous goods. It has an emergency warm-up function: when the ignition key is inserted, the heater turned on from the cab will operate with a power of 9.1 kW for the first 30 minutes.
Features:
- Has an emergency warm-up function: when the ignition key is inserted, the heater switched on from the cab will operate (up to 60 minutes) with a power of 9.1 kW.
- The optimized control system and new linear power adjustment technology increase operational efficiency and further reduce fuel consumption and noise.
- The new DP42 fuel pump is universal for 12 and 24 V, has low power consumption and optimal PWM control.
- The heater is equipped with an ACE system (use of residual heat when the vehicle engine is turned off) and automatic adjustment to the level of oxygen in the air, which guarantees stable operation at an altitude of up to 3.500 m.
- It has an "Arctic start" mode with optimized operation of components for extremely low temperatures and a temperature sensor in the exhaust system, for additional protection against overheating.
- Increased protection class-IP6K9K according to DIN 40050 h. 9 (resistant to high pressure cleaning). It is resistant to a wide range of environmental conditions (ice water and salt / humidity / rain - according to ISO 16750-4, clause 5.4.2). It is
also known as one of the least noisy in its class.
- The installation is optimized thanks to an integrated but removable control unit, compact size (the smallest heater in its class) and an extended range of installation positions.
- Equipped with sealed connectors, the control unit is protected from incorrect connection and latches, their availability is increased, there are no intermediate plugs (components are connected directly to the control unit), diagnostic capabilities are expanded, including self-diagnosis, and adjustment. At the same time, the dimensions of connections to the liquid circuit, fuel line and air intake are the same as in previous versions;
- The new control unit can be installed on the heater of the previous model, or, as before, installed separately from the heater.